How to verify the EGT sensor connector

When the temperature red by the EGT sensor is under 250°F, the meter shows ” – – L – -“.
If the temperature is over 250°F and the meter is still showing ” – – L – – “, the sensor(s) must be checked

EGT Meter

Here’s the yellow connector to verify:

EGT Connector


With the use of a small screwdriver, open the connector.
Verify that the two wires are placed as shown and that they do not touch each other.
If the wires are touching each other, replace them correctly as shown on below photo, then close the connector.

EGT Connector

GET 10% OFF **

Now is the time to change that taillight you’ve always wanted to fix. Change those broken mirrors for modern ones. Add some new gauges for that project of yours… well, you get the idea.

Take a look at our products online, you’ll find all the details: fitment, features, color choices, and style.

*for a limited time **use promocode : project2020